We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
In an article recently published in the journal Annals of 3D Printed Medicine, researchers discussed the development of 3D printed orthotic leg brace having movement assistance.
Study: 3D printed orthotic leg brace with movement assist. Annals of 3D Printed Medicine . Image Credit: ivector/Shutterstock.com
People with neuromuscular disorders or spinal cord or brain injuries have limited mobility. Leg orthotic braces printed in 3D are becoming increasingly common. The enhanced characteristics of the 3D printed polymer components have made it possible to go beyond just cosmetic to load-bearing or structural applications. This, combined with the lesser cost of 3D printing, make additively generated orthotics a viable substitute for traditional orthotics.
In the rehabilitation field, assisted leg brace orthotic devices are developed and tested on volunteers for many years. Recent research incorporates modern battery technology, 3D printing, and smaller microprocessors/controllers. These advancements have resulted in a lighter-weight, more compact, and less expensive design that is more user-friendly.
CAD image detailing the brace frame structure. Image Credit: Boolos, M et al., Annals of 3D Printed Medicine
In this study, the authors discussed the development of a user-customizable 3D printed orthotic leg brace with enhanced rigidity and assisted mobility by using mechatronic linear actuators. The brace's 3D printed frame lattice structure was customized to the user's leg dimensions.
The goal of the design was to facilitate better alignment of the complicated anatomy of the knee joint and to eliminate or reduce the pain associated with long-term brace use. Dual linear actuators were built within the brace to help the user move their leg through the walking motions.
The team used a 3D printed frame lattice structure in the design, which was fitted with dual linear actuators to help the user move their leg at the knee.
The design was split down into ten sections, which were assembled using stainless steel key rings and clevis pins, cap screws, and heat set threaded brass inserts. The frame was fastened to the socket and ball joint modular components. Poly-lactic acid PLA was used to print the prototype bracing structure. Feedback from a thin film pressure transducer positioned between the front lower area of the brace and the user's leg was used to operate the actuation mechanism.
The researchers created the brace using a CAD software and a 3D printer. A bespoke 3D printed leg brace was provided to assist a user with decreased muscle composition in walking. Dual linear actuators and control circuits were used to build the assist mechanism, which aided the user in leg flexion and extension.
Ball and socket joint on the brace. Image Credit: Boolos, M et al., Annals of 3D Printed Medicine
Dual mechatronic linear actuators installed on the brace supported the leg in flexion and extension during the gait cycle as part of the movement assist mechanism. The brace was a lightweight, self-contained device that allowed the user to move around more freely. The user-initiated contraction and extension actions with their leg to control the brace. This assisted patients with weak leg muscles in maintaining their mobility for longer, which resulted in improved quality of life and independence.
A unique additively built "cage" for the leg and a ball and socket joint rather than a typical hinge joint made up the novel leg brace exhibited. The actuators could swing freely as the brace works owing to a finger joint and a pin.
The actuators helped with knee bending from 90 to 180 degrees. After analyzing the feedback data from both the sensors, it was discovered that the posterior sensor was unnecessary and could be deleted from the circuit. In the anterior position, the pressure between the brace and the leg provided a signal that indicated lower leg backward or forwards motion.
The ensuing change in anatomical position generated a change in the pressure sensed by the sensor when the user commenced the action of flexing their leg by lifting their heel. The system instructed the actuators to change their position and verify the pressure reading again when the pressure decreased below a configurable threshold. The pressure was checked and incremented until the pressure decreased below the threshold or the position variable reached 180 degrees. The dimensions and shape of this brace could be adjusted to accommodate any leg size.
Brace fitted on a leg. Image Credit: Boolos, M et al., Annals of 3D Printed Medicine
In conclusion, this study elucidated the development of a self-contained orthotic leg brace that was operated by the user initiating contraction and extension motions with their leg. This brace will allow the user more mobility and thus a better quality of life.
The team described the testing, design, and 3D printing of a lightweight leg brace that acts as mobility assistance by reducing walking effort. They believe that the developed leg brace will help patients with impaired leg muscles to keep their mobility for longer, improving their quality of life and avoiding some of the consequences that come with a sedentary lifestyle like that of a permanent wheelchair user.
Boolos, M., Corbin, S., Herrmann, A., et al. 3D printed orthotic leg brace with movement assist. Annals of 3D Printed Medicine 7 100062 (2022). https://www.sciencedirect.com/science/article/pii/S2666964122000182
Disclaimer: The views expressed here are those of the author expressed in their private capacity and do not necessarily represent the views of AZoM.com Limited T/A AZoNetwork the owner and operator of this website. This disclaimer forms part of the Terms and conditions of use of this website.
Surbhi Jain is a freelance Technical writer based in Delhi, India. She holds a Ph.D. in Physics from the University of Delhi and has participated in several scientific, cultural, and sports events. Her academic background is in Material Science research with a specialization in the development of optical devices and sensors. She has extensive experience in content writing, editing, experimental data analysis, and project management and has published 7 research papers in Scopus-indexed journals and filed 2 Indian patents based on her research work. She is passionate about reading, writing, research, and technology, and enjoys cooking, acting, gardening, and sports.
Please use one of the following formats to cite this article in your essay, paper or report:
Jain, Surbhi. (2022, May 20). How to 3D Print Effective Leg Braces. AZoM. Retrieved on May 20, 2022 from https://www.azom.com/news.aspx?newsID=59121.
Jain, Surbhi. "How to 3D Print Effective Leg Braces". AZoM. 20 May 2022. <https://www.azom.com/news.aspx?newsID=59121>.
Jain, Surbhi. "How to 3D Print Effective Leg Braces". AZoM. https://www.azom.com/news.aspx?newsID=59121. (accessed May 20, 2022).
Jain, Surbhi. 2022. How to 3D Print Effective Leg Braces. AZoM, viewed 20 May 2022, https://www.azom.com/news.aspx?newsID=59121.
Do you have a review, update or anything you would like to add to this news story?
AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.
In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.
Ahead of their talk on green chemistry and profitability in laboratory research at ChemUK 2022, AZoM spoke with Jacqueline Balian from Gambica and Martyn Fordman from Asynt about encouraging sustainability in the chemical industry.
COXEM's CP-8000+ is a powerful cross section polishing tool that uses an argon ion beam to allow precise, advanced sample preparation. Its state-of-the-art technology means the sample is not deformed and does not suffer any kind of physical damage.
This product profile outlines the background information of ARSST tool that is being used for screening tests and operating in "open cell" mode.
This product profile outlines the Evolution™ Pro UV-Vis Spectrophotometers from Thermo Fisher Scientific.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022